Home / SLR PDW Gel Blaster With Programmable Fire Control Chip
  • SLR PDW Gel Blaster With Programmable Fire Control Chip
  • SLR PDW Gel Blaster With Programmable Fire Control Chip
  • SLR PDW Gel Blaster With Programmable Fire Control Chip
  • SLR PDW Gel Blaster With Programmable Fire Control Chip
  • SLR PDW Gel Blaster With Programmable Fire Control Chip
  • SLR PDW Gel Blaster With Programmable Fire Control Chip
  • SLR PDW Gel Blaster With Programmable Fire Control Chip
  • SLR PDW Gel Blaster With Programmable Fire Control Chip
  • SLR PDW Gel Blaster With Programmable Fire Control Chip
  • SLR PDW Gel Blaster With Programmable Fire Control Chip
  • SLR PDW Gel Blaster With Programmable Fire Control Chip
  • SLR PDW Gel Blaster With Programmable Fire Control Chip

SLR PDW Gel Blaster With Programmable Fire Control Chip

Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Features:

    1. Magazine fed
    2. Removable accessories
    3. Metal Mag
    4. Forward and backward movable bolt
    5. Automatically loads gel balls after installing magazine
    6. SEMI/Full Auto/3-Shot Series
    7. Firing Range: 100 F
    8. FPS: 300+
    9. Weight:2 kg
    10. Length:68-75 cm

    Package List:

    • 1 x SLR PDW Gel Blaster 
    • 1 x Free 3D Printed Orange Tip
    • 1 x Plastic Holographic Scope With Green Light
    • 1 x Grip
    • 1 x Packet of Gel Balls (10,000/40000 PCS)
    • 1 x Rechargeable Battery
    • 1 x USB Charging Cable

    Programmable Fire Control Unit (FCU)

    This advanced model is equipped with a programmable Fire Control Unit (FCU), offering superior control and a refined shooting experience.

    • Customizable Firing Modes: Easily switch between Single Shot, 2-Round Burst, and Full-Auto modes to match your tactical needs.
    • Enhanced Trigger Feel: The intelligent FCU ensures a smoother, more responsive trigger pull compared to standard blasters.

    Troubleshooting: FCU Reset Guide

    If your SLR experiences irregular firing, a quick reset of the Fire Control Unit often resolves the issue.

    Follow these steps to reset the FCU:

    • Set the safety selector to SAFE.
    • Press and hold the trigger and do not release it.
    • Continue holding. After about 3 seconds, you will hear three beeps and see the trigger's blue LED flash three times.
    • Keep holding the trigger until a total of 8 seconds have passed. You will then hear one final beep and see the blue LED flash once.
    • Release the trigger. This sequence confirms a successful FCU reset.

    Pro Tip: After a reset, you may need to reconfigure your preferred firing mode.

    Note: This product can only be used with hardened gel balls, regular gel balls will jam.

    Click on the link to see how to install Grip：Video Tutorial

    Product Video:


     

  • Customer Reviews
    No comments
BACK